Product 9/13


This plug and play transmitter is the same used in our FPV1013 plug and play system.
This transmitter uses a solid PLL (Phase-Locked Loop) technology to prevent frequency drift.

Click here to see compatible receivers

Key Features:
- High quality microphone
- Audio volume control
- High quality 5v voltage regulator (no heat and noise free)
- Reverse-Polarity Protection (avoids damage if you plug the battery pack inverted)
- Dual power output (provides selectable power for 5 and 12 volts cameras)
- Molex connector with safety latch (prevents connection to come loose while in use)
- Power LED (helps to identify bad power connection, reminds you to disconnect power when it’s not in use)

If you want to expand your current 1.2 GHz system to another R/C vehicle, or you have damaged your existing transmitter, or you either want to buy everything separated to build your own system, this is the deal.
What are the advantages of a plug-and-play transmitter? A plug and play transmitter eliminates the use of the stock bulky and heavy connectors, no soldering is needed, with only two clicks you will have the camera, battery, microphone (built-in), reversed-polarity protection, microphone volume control...besides all that it can provides power to 5 V or 12 V cameras, click here for plug and play cable for cameras. It works with any of our 1.2 GHz receivers, It uses PLL technology, very tiny and so light weight that if you hold it in one hand and a coin of the same size on the other hand, you'll have a hard time telling which one is heavier. To those whom are going to use it, make sure the voltage your camera needs to be operated, and if you are building your own setup from scratch, the camera connector needs to be made using Futaba type connection, for the following wires colors (white video in) (red + positive) (black - negtive)
It is able to send audio and video wirelessly for more than 3 miles with high gain antennas.

Features:   

  • 1000mW (1 Watt) RF output power Plug and PlayE
  • Two (2) selectable channels CH1 (1260 MHz) and CH2 (1280 MHz)
  •  1.2 GHz frequency band  
  • Works with any camera PAL, NTSC and SECAM 
  • Digital Phase-Lock-Loop circuit no drifting problem  
  • Works with any of our receivers  
  • Plug and Play camera cable is sold separately click here
  • Highly integrated circuit  
  • High reliability/linearity/AIGaAs/GaAs FET amplifier module  
  • Uses digital phase-lock-loop circuit without temperature drifting problem
  • Total weight 59 grams complete with antenna
  • Wires with Molex connectors are included

Specifications:  
Nominal output impedance: 50 ohms
Operating Voltage: 10.5 - 13 volts DC 
Consumption Current 450mAh  
Video input voltage 
75-ohm impedance: 1Vp-p
Audio input voltage 
10k ohm impedance: 1Vp-p  

Sub carrier frequency: 6.5MHz  
Operation temperature: -10 to 40 degrees Celsius
Storage temperature: -40 to 80 degrees Celsius
Operating humidity: 20 to 80%
Dimensions and weight: 50 x 26 x 19mm, 1.17oz (33g) (without antenna)

Frequencies:
CH 1 : 1260 MHz
CH 2 : 1280 MHz


Notes:
- No license is required to purchase it, however in order to legally operate within USA an amateur radio license is required.
- Make sure you use the "stylus" tool that comes as an inserted to the side of the receiver's case. Use the "stylus" tool to toggle the plastic DIP switches, the DIP switches can be damaged if improper tool is used.
Disclaimer: Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.

 

 

TXV1012 V1 1.2-1.3 Ghz 1W FPV Plug & Play (US) Transmitter

Product SKU: 3906-53

  • Brand: LawMate
Status : Back Ordered (Ships as soon as available)

Current Reviews: 0

CLICK HERE to be notified when this product is back in stock.

$89.89
Max: 3
Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “TXV1012 V1 1.2-1.3 Ghz 1W FPV Plug & Play (US) Transmitter” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!