The FLD-02 displays in real time all the data remotely transmitter from your RC model via FrSky a duplex receiver.
Very powerful tool to let you know what's going on with your model to safely operate it.
Even if your FrSky duplex receiver mounted in your RC model has no sensor plugged you will receive basic data such as RSSI signal strenght.
# Model: FLD-02
# Compatibility: FrSky DFT, DJT and DHT
# Dimension: 55*40*12mm
# Pixel: 128*64
# Show all connected sensors data;
# Capable of programming alarm thresholds and directions;
# Firmware upgradable.
Note: Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors.
The alarm thresholds and directions (either above or below threshold) can be programmed. After alarm thresholds and directions are programmed, click “OK”. ”√” means these values have been remembered by the module.
Instructions Manual Here