English  
Currencies:  
google link

fast_ship_image

FPV582-F Plug and Play 5.8 GHz 200mW Wireless System - (F Band)

Price: without optional accessories: $59.99

Select options for this product here:

Please Choose:





Add Battery to Power this Kit








Add to Cart:
  • Part Number: 0726-13
  • Manufactured by: Boscam
  • Stock Status: Available


Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there.
This another great option to those whom want to do FPV without interference problems with 2.4 GHz R/C radios.
The 200mW 5.8 GHz transmitter and receiver are capable to go take your audio and video wirelessly where many others transmitters can't.
The tiny pocket size receiver besides its small size, it also comes with two (2) A/V outputs to easy connect two video displays or 1x video display and 1x video recorder simultaneously.
We flew this combo with the stock whip antennas, and even so we got to go at 1Km (1/2 of a mile) at 500' feet high or more!
With a high gain patch antenna connected to the receiver we are getting ranges about 1.6+ km (1+ mile).
It's great and reliable system, with all the important features that plug and play systems must to have.
 
Note to use any other antenna besides the original an RPSMA adapter is needed.
 

Heres is a courtesy video of one of our customers using this system.

 

 


Transmitter's features:
- Output Power?23dBm
- High grade switching regulator.
- Built-in microphone with volume control.
- Working voltage: DC 7.2 - 12v (9 - 12v performs better)
- Camera port output voltage (will be the voltage used to power the transmitter -0.5V)
- 8 Selectable channels: DIP switches
- Working Frequencies:
 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz.
- Current consumption: 180mAh
- Digital phase-locked loop circuit, no channel drift issues.
- High quality noise filtering circuit.
- Regulated output voltage for the camera.
- Low profile circuit board.
- All Molex type of lathed plugs for safe connections.
- Dimensions:14 x 26 x 39 mm (0.45" x 1" x 1.5" inches).
- Weight 26 grams (0.9 oz).
 
Receiver's features:
- Dual (2x) Audio and Video outputs.
- 8 Selectable channels: DIP switches
- Working Frequencies:
5740, 5760, 5780, 5800, 5820, 5840, 5860MHz.
- Working voltage: 8-12 VDC (runs cooler with 8V)
- Current consumption: 120mAh
- Dimensions:13 x 52 x 60 mm (0.4" x 2" x 2.5" inches).
 
Powering the receiver:
Connect power (8-12V) to the receiver, and then press and hold the receiver’s power button until the display comes on.
To select the channels, just quickly press the power button.

 
- Weight 48 grams (1.7 oz).
- Transmitter's power plug with leads
- Receiver's power plug with leads
- Receiver's A/V out cable with RCA plugs
- 2x 2dBi whip antennas
-12 volts camera with a plug and play cable (Futaba connector type) can be added to this combo. (see below for this option).

 Note:  No license is required to purchase it, however in order to legally operate within USA an amateur radio license is required. 
Disclaimer: Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.

 

 

Real Customer Reviews

Write Review
sabrina gilliard

If you are looking for entry level fpv this is it! Everything was plug and play as states I did add my own connector the the rx. ( they don't come with one ) had a small issue with the camera but in 7 days I had the item shipped back and replaced. Nicest service I've found on the net and when I'm ready I'll be back for the 900 system :) thanks hobby wireless and thanks stoneblueairlines. For sending me here,

Wilbur Provost

Warning. This system uses a different wiring pattern for the video cable than Fatsharks. I plugged my video cable to my Mobius camera which worked great on my Fatshark transmitters, but unfortunately the power and negative wires are reversed for this system. I managed to fry both my video transmitter, and also my Mobius camera. I can not speak as to the quality of the rest of the components, as I was never able to try them, without a working video transmitter.

Roland Simmons

This is a wonderful system at a great price. I highly recommend this to anyone looking for a 5.8 GHz video system for FPV. I easily went 1 km and still could have went further (using Blu Beam antenna). If you are looking to get into FPV on a budget, this would make a great starter kit. I know that they call this plug and play but it wasn't for me. No big deal. Nothing in FPV is plug and play.



Current Reviews: 3

Current Reviews: 3

This product was added to our catalog on Tuesday 20 March, 2012.