New firmware for fixed wind and Multi-Rotor aircraft.
Click here for firmware and instructions. Multi-rotor instructions can found here
The FY-30A is an inertial attitude measurement instrument used for automated stabilization of fixed wing model aircrafts and two axis camera gimbals.
The FY-30A also has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit ca be turned on or off for the following functions:
Level flight When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence.
The system can be activated throughout the entire flight duration, from take off to landing.
Emergency Recovery If you lose orientation or feel the plane out of control, then release all control sticks, maintain throttle and switch on the FY30A. The unit will automatically send the correct signals to balance of the aircraft and regain level flight.
Aerobatics For the experienced fixed wing 3D pilot, the FY-30A can help you achieve a more accurate flight path, especially in windy conditions.
FY-30A makes 3D maneuvers such as inverted flight, knife-edge, crane etc easier and simpler to achieve and maintain. A great way to practice and improve your 3D flying.
FPV (First Person View) For long-distance RC flight via video transmitter, the FY30A will maintain the balance of your aircraft. You only need to control the heading of your aircraft and enjoy the view.
Firmware upgrade The FY30A firmware is upgradable by connecting to your computer via a USB TTL cable. As Feiyu Tech continuously improves the FY30A system, firmware upgrades will be released periodically.
**PLEASE** read the instructions manual carefully before using the system to ensure proper use and operation. Click here
FY-30A for multi-rotor control instruction manual here
For those who wish to use the FY30A with 433mHz long range radio system, please update your firmware .
Download FY30A Firmware Upgrade Procedure: Click Here
Download USB TTL Cable Driver for Windows 7: Click Here
Download USB TTL Cable Driver for Windows XP: Click Here
Download Firmware Uploading Software: Click Here
Package Includes:
● 1 x FY-30A circuit board.
● 4 x Receiver connecting wires
● 2 x double-sided tape or Velcro fastener
● 1 x shock absorbing platform with 4 rubber bands already installed
● 1 x instruction manual for FY-30A
FY-20A and FY-30A Feature Comparison:
|
Function |
FY-20A |
FY-30A |
|
Automatic balancing |
Automatically level the aircraft |
Able to record the aircraft level flight attitude and automatically correct for stable flight. Heading is locked. Better vibration resistance. Angular rate automatically determine for better stability and performance consistency during level flight. |
|
3D model |
Simple angular rate control for 3D flight stability. |
Hold the aircraft axis during flight, making it easier to complete acrobatic flight. |
|
Vibration characteristics |
Will not work when vibration exceeds the critical level. |
When high vibration is experienced, angular rate balance mode is automatically engaged to ensure flight safety. |
|
Support models |
Traditional layout, flying wing, and aircraft with no flaps. |
Traditional layout, flying wing, V tails, and aircraft with no ailerons. |
|
PTZ control mode |
Not supported. |
Can be used for camera gimbal stabilization. Linear rate of deflection stabilization. |
|
Attitude data output |
Not supported. |
Data output available: Rate: 4HZ per second. |
|
Firmware upgrade |
Not supported. |
Can be upgraded as new firmware is released. |
|
Maximum roll rate |
1200 Degrees / sec |
2000 degrees / sec. |
|
Weight |
20g |
15g |
|
Size |
20 × 33 ×55MM |
16 × 27 × 47MM |
Current Reviews: 0
This product was added to our catalog on Wednesday 14 September, 2011.
