Product 6/8


The new T1013 Pro Version 1.3 GHz transmitter is better than ever! Following the same performance of its older brother T1013 Plus V2 transmitter, the T1013 Pro version comes in a new lighter weight and smaller aluminum case (14g less than V2), making it a perfect fit for projects where space and weight are concerns.

You still get the 500/1000 miliwatts of switchable pre RF output and it continues to be the best transmitter for long range applications. (for RC models is recommended to install the T1013 Pro as far as possible away from the models receiver). This new version is 45% ligther weighing only 0.5 ounces (16grams).  With all this, and the right antenna setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1013 Pro has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.    

Features:

  • 500/1000mW RF output power
  • (7) User-selectable channels
  1. 1200
  2. 1220
  3. 1240
  4. 1258
  5. 1280
  6. 1300
  7. 1320
  8. 1340
  • 1.3 GHz frequency band
  • Works with any camera PAL or NTSC
  • Digital Phase-Lock-Loop circuit no drifting problem 
  • Works with any of our receivers
  • Audio and Video cable with RCA adapter
  • Highly integrated circuit
  • High reliability/linearity/AIGaAs/GaAs FET amplifier module
  • Uses digital phase-lock-loop circuit without temperature drifting problem
  • Weight: 16g (transmitter only)

 Specifications:  

  • Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
  • Nominal output impedance: 50 ohms
  • Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
  • Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
  • Video input voltage 75-ohm impedance: 1Vp-p
  • Audio input voltage 10k ohm impedance: 1Vp-p
  • Sub carrier frequency: 5.5MHz
  • Operation temperature: -10 to 40 degrees Celsius
  • Storage temperature: -40 to 80 degrees Celsius
  • Operating humidity: 20 to 80%
  • Storage humidity: 10 to 80%
  • Dimensions and weight: 37 x 27 x 12.25mm, 0.21oz (16g) (without antenna)

Package Includes:

 
Click here to see the transmitter and camera connections.  Note: BNC to RCA adpater is sold separately in accessories.

Legal notice: 
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to VERY EXPENSIVE fine.
No license is required to purchase it, however in order to legally use and operated of this device in the United State of America a HAM license is required. To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely. 
By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. 
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.

T1013-PRO 1.2-1.3 GHz 0.5-1W Long Range FPV Transmitter (NON-US VERSION)

Product SKU: 3520-102

  • Brand: ElectrifyRC
Status : Available in Stock

Current Reviews: 0

$99.99
Max: 500
Qty Discounts New Price
1-4
$99.99
5-19
$89.99
20+
$79.99