Product 1/2

The new TR1013 Eagle Pro Long Range System from ElectrifyRC is better than ever, it has been completely redesigned and tailored for FPV with a handful of improvements. The receiver has higher sensitivity constructed with high grade components well shieled in an aluminum case. While transmitter has new voltage regulator no noise circuit, ceramic high efficiency low profile heat sinks, high quality audio channel, runs at least 35% cooler, thinner profile, 10 grams lighter and overall better performance.

It's perfect for long range applications, (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams .It's highly recommended install the transmitter in ventilated areas, to allow the air to keep it cool.
The system can be powered  using any DC power source from 10.5 to 13 volts DC example: 3 cells lithium polymer battery works great.

This system can easily provide 3+ miles of range by upgrading the receiver's stock antenna to high gain patch antenna.
When using a 1.2 - 1.3 GHz video system with any 2.4 Ghz radio transmitter, a Low Pass 1.2 GHz Filter is recommended to prevent harmonics from affecting your RC system.
In order to get the best results of this system, we recommend upgrading the stock antennas to better ones available here.

Quick User Guide
What is the range of this FPV system?  
How far can I go with this FPV system?


Transmitter Specs:
Camera Compatiblity: Works with any Analog PAL or NTSC
Audio and Video: RCA Female PigTail
- Audio Sub-Carrier: 6.5 MHz
- Operation Voltage: 10.5-13 volts DC volts
- Consumption Current: 450mAh
- Weight: 35 grams
- Dimensions: 50x26x13 mm
- Antenna: Detachable SMA Antenna
- Audio and Video Connections: RCA Female  

Transmitter's - Channels/Frequencies

  • Channel 1: 1200 MHz
  • Channel 2: 1220 MHz  
  • Channel 3: 1240 MHz  
  • Channel 4: 1258 MHz  
  • Channel 5: 1280 MHz   
  • Channel 6: 1300 MHz  
  • Channel 7: 1320 MHz   
  • Channel 8: 1340 MHz   

Receiver Specs:
- Operating Voltage: DC 12V
- Power Consumption: 230mA 
- Typical Sensitivity: -90dBm
- Frequency Band: 1.2/1.3 GHz 
- Channels: 8 Selectable channels
- Weight: 109g
- Dimensions: 80 X 120mm
- Antenna: Detachable SMA Omini antenna

Receiver's Specs: 
- Auto Sub Carrier: 5.5 MHz
- SAW Filter Bandwidth: 17MHz
- RF sensitivity: -90dBm (typical)
- Supply current: Vcc 250mA (maximum)
- Video Output Voltage: 75-ohm impedance 1.5 Vp-p
- Audio input voltage: 10k ohm impedance  1 Vp-p
- Operating voltage: Vcc, 11V (minimum) to 16V (maximum)
- Dimension: 78 x 65.5 x 25 mm (3.7x2.9x.98 in)
- Weight: 140 g (4.9 oz)
- Accessory: includes antenna and RCA A/V cable.

Receiver's Channels/Frequencies:

  • Channel 1: 1200 MHz 
  • Channel 2: 1220 MHz
  • Channel 3: 1240 MHz
  • Channel 4: 1300 MHz
  • Channel 5: 1320 MHz 
  • Channel 6: 1340 MHz
  • Channel 7: 1258 MHz
  • Channel 8: 1280 MHz

Package includes:
T1013 Eagle 1.2/1.3 GHz Transmitter 
- R1200 Pro 1.2/1.3GHz Receiver, compatible to PAL, NTSC and SECAM.
- Receiver's Audio and video output cable with RCA connectors
- One set of two 3dBi antennas
- Power Plug 

Transmitter's Jack connector to RCA AV input and power input cable x 1 (optional and sold separately HERE)

Legal notice: 
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to hefty fine.
To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely.
Please click here for US version  

Disclaimer: Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.
Avoid Permanent Damage: Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.

TR1013 EAGLE PRO 1.2/1.3 GHz 0.5/1W LONG RANGE WIRELESS A/V SYSTEM (Upgraded SAW Filter) - NON-US VERSION - Made In Taiwan

Product SKU: 4121/4548-136

  • Brand: ElectrifyRC
Status : Back Ordered (Ships as soon as available)

5 of 5 Stars!
Current Reviews: 1

Current Reviews: 1

Qty Discounts New Price