This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It has eight (8) selectable channels and it is the best transmitter for long range applications. (for RC models is recommended to install the T1024 as far as possible away from the models receiver). Even with all that power, it weights less than 1 ounce (27g).
It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool.
As any of our transmitters, T1024 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.
- 2.4GHz band frequency A/V transmitter
- Copper-Nickel-Zinc-Alloy Case (w/ceramic heat sink)
- Compact size module, high output power (1W)
- Highly integrated circuit
- High reliability/linearity/AIGaAs/GaAs FET amplifier module
- Uses digital phase-lock-loop circuit withou temperature drifting problem
- Weight: 30g (transmitter only)
- Eight (8) selectable channels (USA version only channel 1 is available)
- CH1 2410MHz (*US Channel)
- CH2 2430MHz
- CH3 2450MHz
- CH4 2470MHz
- CH5 2370MHz
- CH6 2390MHz
- CH7 2490MHz
- CH8 2510MHz
- Operating Voltage: DC12V
- Operating Current: ≤ 350mA
- Trans. Range: 200m (Open Space)
- Transmission Power: 30 ± 1 dBm
- Power Consumption: ≤ 4.2W
- Operating Temperature: 0~60°
- Operating Humidity: 20~90%
- Channel Selection: Dip Switch
- Antenna Connector: SMA Connector
- Frequency Lock Method: Digital Phase Lock Loop
- Weight: 27 ± 1g
- Dimension: 59.8*25*11.3 mm (L*W*H)
- 1x 2.4GHz 1000mW AV transmitter
- 1x SMA type dipole antenna
- 1x Jack connector to RCA AV input and power input cable
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to VERY EXPENSIVE fine.
No license is required to purchase it, however in order to legally use and operated of this device in the United State of America a HAM license is required. To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely.
By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.