PRODUCTS & LINKS
Product 2/2


This system is great for those who want to do their own wiring and custom connections. If you don't want to do any soldering and customizing the harness to make your own, then we suggest the Iron Horse plug and play kit which is the same but is the Plug and Play customized version of this system.
The new 3.3 GHz transmitter has been completely redesigned and tailored for FPV with a handful of improvements, such as: new switching regulator, ceramic high efficiency low profile heat sinks, high quality audio channel, runs cooler, thinner profile, and gives overall better performance.
It's perfect for a wide range of applications (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it is light weight.  It's highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool.  The system can be powered  using any DC power source from 10.5 to 13 volts DC example: 3 cells lithium polymer battery works great.

Note: DIY ( Do-It-Yourself) means, you do your own custom wiring, and plugs.

Package includes: 
- Transmitter 3.3 GHz with RCA cable for audio and video input.
- High Sensitivity Receiver R3300, compatible with PAL/NTSC
- Receiver's Audio and video output cable with RCA connectors
- One set of two antennas
- Power Plug for receiver and transmitter is needed.
- Microphone is available to be used with this transmitter 

Transmitter Specs: 
- Iron Horse T3300 Transmitter 3.3 GHz 500/1000mW
- Works with any camera PAL or NTSC
- Digital Phase-Lock-Loop circuit no drifting problem
- Audio and Video cable with RCA adapter
- Detachable SMA Antenna
- Audio Sub-Carrier 6.5 MHz
- Operation Voltage 10.5-13 volts DC volts
- Operating Current < 450mAh
- Dual Selectable Power Output: 30 dBm (1W)
- Power Consumption at 12VDC: < 5.5w
- Operating Temperature: 0~60c
- Operating Humidity: 20-90%
- Transmitter weight 27 grams (0.9 oz)
- Dimensions 49 x 11 (including heatsink) x 24 mm

8 Channels 
Operating band: 3.3 - 3.4 GHz

GROUP A
CH1: 3320
CH2: 3345
CH3: 3370
CH4: 3395
CH5: 3420
CH6: 3445
CH7: 3470
CH8: 3495


Receiver Specs:
- Operating voltage from 10.5 to 13 volts DC
- Current Consumption: < 150 mAh
- Video Output: 75 ohm load
- Audio Output: 1k load
- Dimensions 47.5 x 69.5 x 16 mm
- Detachable SMA Omni antenna  
- Weight:45g without antenna

8 Channels
Operating band: 3.3 - 3.4 GHz

GROUP A
CH1: 3320
CH2: 3345
CH3: 3370
CH4: 3395
CH5: 3420
CH6: 3445
CH7: 3470
CH8: 3495

** This international version can not be shipped to any address in the United States.


We highly recomended upgrading the low cost stock antenna to get the performance of your 3.3 GHz FPV system
Click here to see all the antennas available for 3.3 GHz.


Legal notice: 
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to VERY EXPENSIVE fine.
No license is required to purchase it, however in order to legally use and operated of this device in the United State of America a HAM license is required. To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely. 
By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. 
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.

 

Iron Horse 3.3-3.4GHz 0.5/1W 8CH Transmitter and Receiver Set V2 (NON-US VERSION SPECIAL ORDER ONLY) - Made In Taiwan

Product SKU: 4761/3628-115

This system is great for those who want to do their own wiring and custom connections. If you don't want to do any soldering and customizing the harness to make your own, then we suggest the Iron Horse plug and play kit which is the same but is the Plug and Play customized version of this s...
  • Brand: ElectrifyRC
Status : Back Ordered (Ships as soon as available)

Current Reviews: 0

Click here to be notified when this product is back in stock.

$189.99
Max: 30
Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Iron Horse 3.3-3.4GHz 0.5/1W 8CH Transmitter and Receiver Set V2 (NON-US VERSION SPECIAL ORDER ONLY) - Made In Taiwan” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!