FPV READY KIT FOR DJI PHANTOM - BEST KIT FOR PHANTOM'S USERS
The Ultimate in convenience and fun for your DJI Phantom 1 or 2. This combo is complete with a Black pearl HD FPV monitor with a built in 32Ch diversity receiver and battery, a 25/200/600mw Transmitter with Gopro 3 (or 3+) plug and play cable. Included are a CNC FPV LCD transmitter mount, two 11.1 volt lipo batteries to power the monitor and transmitter, a set of Spironet antennas, and a Spironet Patch antenna.
The Flysight RC801 Black pearl is a HD FPV monitor with a built in 32Ch diversity receiver and battery. This makes the monitor compatible with all our 5.8Ghz FPV Transmitters. With an integrated battery, this monitor is everything you need on your ground station!
- 7" HD 1024*600 Screen With Built In Lipo Battery 5.8Ghz 32CH (Includes Charger)
- 5 modes supported: Diversity/RX1/RX2/AV IN//HDMI mode (Video Transmitter is Required)
- Integrated Battery
- No "blue/black screen"
- Compatable with Fatshark and ImmersionRC
- Contrast: 700:1
- Luminance: 300cd/m^2
- Antenna Ports: 2 X RP-SMA, 50ohm
Output Power: 25/200/600mw Black Bird Transmitter
High grade switch regulator.
Built-in microphone with volume control.
Working voltage: DC 7.2 - 12v (9 - 12v performs better)
Camera port output voltage (will be the voltage used to power the transmitter -0.5V)
Selectable channels: DIP switches
Working Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz. (Not compatible with old version receivers or AIO glasses).
Current consumption: ~280mAh
Digital phase-locked loop circuit, no channel drift issues.
High quality noise filtering circuit.
Low profile circuit board.
All Molex type of latched plugs for safe connections.
Dimensions:14 x 26 x 39 mm (0.45" x 1" x 1.5" inches).
Weight 26 grams (0.9 oz).
2 11.1 volt 800mah lipo with jst connectors.
2x Spironet Antennas
1x Spironet Patch Antenna
Kit also includes 1 rpsma adapter,1 cnc transmitter LCD mount.
Camera Plug and Play cable:Gopro 3 and 3+
* No DJI Phantom/DJI Transmitter or camera is included*
Note: This is universal standalone system, was tailored to work independetly from DJI or any other Read-To-Fly aircraft.
User must to have some basic FPV knowledge to assemble and use it.