Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?
Then what you will need is the FPV980 complete Audio and Video wireless system.
The FPV980 has everything you need to make your video wirelessly, if you select any of the cameras below a plug and play camera cable will be provided for easy connection.
This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly.
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency drift.
The plug and play board has lots of important features built-in.
- High quality microphone
- Audio volume control
- High quality 12v switching voltage regulator for camera and transmitter
- Reverse-Polarity Protection (avoids damage if you plug the battery pack inverted)
- On/Off Switch for transmitter
- Molex connector with safety latch (prevents connection to come loose while in use)
- Power LED (helps to identify bad power connection, reminds you to disconnect power when it’s not in use)
Channel 0 = 910 MHz
Channel 1 = 980 MHz
Channel 2 = 1010 MHz
Channel 3 = 1040 MHz
The FPV980 transmitter can be powered through a JST connector using any DC power source from 10.5 to 22 volts (note: a 3s 11.1v lithium polymer battery can be used to power the system).
This wireless system will perform even better using BlueBeam antennas.
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to VERY EXPENSIVE fine.
No license is required to purchase it, however in order to legally use and operated of this device in the United State of America a HAM license is required. To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely.
By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.