This is a NEWEST design, with a 1000mw (1W) Telemetry Receiver included.
Constructed using the best performing high quality componenets, and the latest and most advanced technology available.
This system is built to out perform everything else on market and last for many years.
It is not cheap, but it will be the best FPV investment you will make. Some of its great features include:
Full Bidirectional Telemetry to 50 KM with stock antennas.
Built in serial Radio Modem
Works with Mission Planner / Droid Planner ( Wish GPS installed )
Built in Bluetooth for any android Smartphone or Tablet
Fully configurable using PC software.
Configuration via android device ( in development )
Adds up to 3 Channels to your RC system with switches and knobs on top of unit
Lost plane finder - Simply see where it is on Smartphone
Configurable, Multifunction Switches and Knobs
Two Multicolor Status LED's for alarms, status, voltage, etc.
Audible alarms ( For Low Voltage in Copters, Low RSSI, Etc )
Full Logging of flight, position, etc.
Removable SD card.
Super Fast update rate for Racers and obstacle flyers.
Hassle free, no extra steps operation for those that want basic experience.
Fully compatible with Dragon Link Micro Receivers ( Full Bidirectional )
Future Compatibility ( One Way ) for V2 Receivers that have Next Generation Firmware on them.
It is Dragon Link, it will outperform anything in existence.
The Dragon Link complete system is made in the USA, and FULLY GUARANTEED in the USA.
The system includes everything you need for long range and high performance RC control, there is nothing additional to purchase.
(NOTE: The Dragon Link system is for RC control only, it does not transmit or affect video transmission in any way.)
The Dragon Link Large 1000mw (1W) Telemetry receiver has plenty of performance!
The Receiver outputs PPM, Sbus, Standard PWM servo signals, and is fully compatible with ALL Copters, flight controllers, OSD's, Autopilots, and other FPV devices. The receiver is the best most advanced RC receiver ever made !!! The receiver is plug and play, and will work perfectly right out of the box. If you do wish to connect it to your computer, just connect it with any standard Micro USB cable as you would have for your cellphone or camera, and you can access a vast amount of features built in. Features include: Fully configurable channel mapping, Spectrum Analyzer, Emergency Plane Locater Beacon, Built in Memory for Complete System logging, GPS input, and more. The really great thing about this receiver is that each output pin is assignable to any channel that you want. To use all 12 channels of the receiver, Simply feed the PPM output to your flight controller or OSD, and assign the remaining pins of the receiver to higher channels and accessories, This way you can use all 12 channels though this small receiver, All flight controls though the PPM and free up the remaining output pins for servos and accessories.
Manual download .PDF manual and configuration software
Instalation guide: www.dragonlinkrc.com/instructions/v3equipment
Check out this You Tube video.
- Transmitter Module Voltage: 5 - 18 Volts (2-4 cell LiPo)
- Receiver Voltage: 5 - 9 Volts (UBEC or 2 cell LiPo)
- Frequency: 433 MHZ - Frequency Hopping in ARS Band.
- Typical Range: 40 KM Using Supplied Antennas
Package Includes: Everything you see in the above pictures!
- 1 x Long Range Transmitter Module
- 1 x Long Range Advanced Large 1000mw (1W) Telemetry Receiver
- 1 x Genuine Nagoya Transmitter Antenna
- 1 x High Performance FPVPro Receiver Antenna
- 1 x Connection Cable for Transmitter Module (Futaba Connector)
- 1 x Mounting Bracket for Transmitter Module
- 2 x Dragon Link Decals
Still have questions about it contact: firstname.lastname@example.org
For quicker support, use the forum: DragonLink RCGroup Thread
No license is required to purchase it, however in order to legally use and operated of this device in the United State of America a HAM license is required. To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely.
By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.