Eagle Tree

  • Eagle Eyes FPV Ground Station (Clear Cased)
    Eagle Eyes FPV Ground Station (Clear Cased)
    The EagleEyesTM FPV Station integrates four of the main components you need for FPV on the ground, at a cost that's lower than many of the individual components presently available! Receiver... The EagleEyesTM FPV Station integrates four of the main components you need fo...
  • VECTOR Flight Controller with Color OSD (DEANS)
    VECTOR Flight Controller with Color OSD (DEANS)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • VECTOR Flight Controller with Color OSD (WIRE LEADS)
    VECTOR Flight Controller with Color OSD (WIRE LEADS)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • VECTOR Flight Controller with Color OSD (XT-60)
    VECTOR Flight Controller with Color OSD (XT-60)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • Complete OSD PRO V4 100A (Connectors)
    Complete OSD PRO V4 100A (Connectors)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • Complete OSD PRO V4 100A (Leads)
    Complete OSD PRO V4 100A (Leads)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • Complete OSD PRO V4 150A (Leads)
    Complete OSD PRO V4 150A (Leads)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • eLogger V4 with Integratrated Connectors (MPRV-CONN-100)
    eLogger V4 with Integratrated Connectors (MPRV-CONN-100)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 1...
  • eLogger V4 with Wire Leads 80V 100A (MPRV-LEADS-100)
    eLogger V4 with Wire Leads 80V 100A (MPRV-LEADS-100)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 1...
  • eLogger V4 with Wire Leads 80V 150A (MPRV-LEADS-150)
    eLogger V4 with Wire Leads 80V 150A (MPRV-LEADS-150)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 10...
  • PowerPanel lightweight LCD Display
    PowerPanel lightweight LCD Display
    Now you can connect our PowerPanel lightweight LCD Display module to your eLogger! This ultra thin LCD display connects to the eLogger with the included 11" data cable, and lets you get your max... Now you can connect our PowerPanel lightweight LCD Display module to your eLogg...
  • Vector Info LCD Panel
    Vector Info LCD Panel
    The InfoPanel LCD display makes it easy to check the status of your Vector equipped model and configure settings at the field, without needing to use laptop or video goggles. Check out these... The InfoPanel LCD display makes it easy to check the status of your Vector equi...
  • ALTITUDE - Altimeter Microsensor V4
    ALTITUDE - Altimeter Microsensor V4
    The Eagletree new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data... The Eagletree new Airspeed and Altitude MicroSensors have two modes: they work ...
  • 3-Axis G-Force MicroSensors 7 +Gs
    3-Axis G-Force MicroSensors 7 +Gs
    Eagle Tree is pleased to offer the world's first standalone G-Force meter for RC models.  The tiny,  low cost sensor measures up to 7 +Gs in the X, Y, and Z axes during flight, and the... Eagle Tree is pleased to offer the world's first standalone G-Force meter ...
  • Alerter/Buzzer With LED for Vector
    Alerter/Buzzer With LED for Vector
    Small and lightweight, the powerful Alerter Buzzer/LED provides important audiovisual information about your Vector equipped model's status.   Great for use when flying either FPV or LOS.... Small and lightweight, the powerful Alerter Buzzer/LED provides important audio...
  • Brushless RPM Sensor
    Brushless RPM Sensor
    Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a splice (not inline) which simplifies installation. ... Tiny sensor measures RPM by simply connecting a wire from one of your brushless...
  • Dual Axis G-Force Expander (GFORCE-38)
    Dual Axis G-Force Expander (GFORCE-38)
    G-Force Expander (GFORCE-38) Measures dual axis acceleration and G-force up to +/- 38 G's. Click here to view Instruction Manual (PDF) Click here for info on using more than one G-Force... G-Force Expander (GFORCE-38) Measures dual axis acceleration and G-force up to ...
  • Electric Expander - 100 Amp (ELEC-EXP-100)
    Electric Expander - 100 Amp (ELEC-EXP-100)
          Description: Electric Expander - 100 Amp (ELEC-EXP-100) Measures motor battery pack current and voltage. Electric Expander Specifications: Pack Voltage: 0 to 50V Pack Current: 0...       Description: Electric Expander - 100 Amp (ELEC-EXP-100) M...
  • Electric Expander - 140 Amps
    Electric Expander - 140 Amps
          Description: Electric Expander - 140 Amp Measures motor battery pack current and voltage. Electric Expander Specifications: Pack Voltage: 0 to 50V Pack Current: 0 to 140 Amps,...       Description: Electric Expander - 140 Amp Measures motor b...
  • Micro Temp Sensor (TEMP-MICRO)
    Micro Temp Sensor (TEMP-MICRO)
    Perfect for measuring temps of your batteries and ESC. 250 degrees F max temp. Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2). ... Perfect for measuring temps of your batteries and ESC. 250 degrees F max temp. ...
  • Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM)
    Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM)
      Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM) Meeasures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling...   Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM) Meeasures your RPM...
  • Temperature Sensor (TEMP-LOOP)
    Temperature Sensor (TEMP-LOOP)
    Temperature Sensor (TEMP-LOOP) Loop-around temperature sensor measures temp up to 420 degrees F. Great for looping around motors. NEW: Up to three temperature sensors can be connected to the eLogger... Temperature Sensor (TEMP-LOOP) Loop-around temperature sensor measures temp up...
     $8.49$6.99 --21%

  • 12" (300mm) Extended Receiver Connection Harness (VECTOR)
    12" (300mm) Extended Receiver Connection Harness (VECTOR)
      Extended Length Six channel receiver connection harness (12"/300mm)   Extended Length Six channel receiver connection harness (12"/300mm)...
  • 4" Vector Receiver Connection Harness
    4" Vector Receiver Connection Harness
    A replace cable for your vector system and is shorter than original cable  4 in long A replace cable for your vector system and is shorter than original cable ...
  • Battery Backup Harness (CAB-BAT-BACK)
    Battery Backup Harness (CAB-BAT-BACK)
      Description: Battery Backup Harness (CAB-BAT-BACK) Lets you power your eLogger from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.5 v. Note that the eLogger...   Description: Battery Backup Harness (CAB-BAT-BACK) Lets you power your...
  • Male RCA to Servo Connector Adapter Cable for OSD Expander
    Male RCA to Servo Connector Adapter Cable for OSD Expander
      NEW: RCA to Servo Connector Adapter Cable for OSD Expander Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA. – If you...   NEW: RCA to Servo Connector Adapter Cable for OSD Expander Useful if yo...
  • Plug and Play AV Cables for Fat Shark/Immersion RC
    Plug and Play AV Cables for Fat Shark/Immersion RC
    Wiring your Vector is now even simpler if you use the popular Fatshark/IRC style video transmitters, and either a Fatshark style camera or GoPro Hero 3/4 camera!   Just plug the cable in to your... Wiring your Vector is now even simpler if you use the popular Fatshark/IRC styl...
  • RPM or Temperature Extension Cable (CAB-RPM-EXT)
    RPM or Temperature Extension Cable (CAB-RPM-EXT)
    RPM or Temperature Extension Cable (CAB-RPM-EXT) 12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors. – If you need more information, use these Eagle Tree Systems... RPM or Temperature Extension Cable (CAB-RPM-EXT) 12” (30 cm) 3 pin exten...
  • T-Fitting (PITOT-T-FITTING)
    T-Fitting (PITOT-T-FITTING)
      T-Fitting (PITOT-T-FITTING) Small plastic Tee fitting for sharing the static source of the pitot tube with both altimeter and airspeed static inputs.   – If you need more...   T-Fitting (PITOT-T-FITTING) Small plastic Tee fitting for sharing the st...
     $1.50$1.59 -6%

  • USB Cable Mini-B
    USB Cable Mini-B
            This is a standard USB "Mini-B" for Eagle Tree equipment, i.e. EagleEye FPV Station.           This is a standard USB "Mini-B" for Eagle...
  • USB Micro Cable for Guardian 2D/3D Stabilizer
    USB Micro Cable for Guardian 2D/3D Stabilizer
           Standard "Micro" USB Cable                Standard "Micro" USB Cable   &...
  • Vector Cable Set
    Vector Cable Set
    Set of all four Vector cables: - Audio - Video - GPS harness - Four Inch Receiver harness Set of all four Vector cables: - Audio - Video - GPS harness - Four Inch R...
  • Clip-on Ferrite Choke (CHOKE-FERRITE)
    Clip-on Ferrite Choke (CHOKE-FERRITE)
    Snap-on Ferrite Choke (CHOKE-FERRITE) Useful for suppressing RF from noisy video camera or other leads. Weight 0.4 oz, (7 grams). One will snap around several adjacent cables. – If you need... Snap-on Ferrite Choke (CHOKE-FERRITE) Useful for suppressing RF from noisy vide...
  • Dual Channel A/D Input Board (DUAL-AD)
    Dual Channel A/D Input Board (DUAL-AD)
    Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander adds two channels of high resolution Analog to Digital to the System, with up to 15 bit resolution.   Click here to... Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander ad...
     $79.99$69.99 --14%

  • Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG)
    Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG)
    Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG) Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor. – If you need more information,... Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG) Measures RPM to 50K+. See...
     $6.99$6.99 -0%

  • Plastic Pitot Tube Kit (PITOT-KIT-STD)
    Plastic Pitot Tube Kit (PITOT-KIT-STD)
      Our original plastic pitot tube with approx 3 feet of medium silicone hose. – If you need more information, use these Eagle Tree Systems resources – E-mail:...   Our original plastic pitot tube with approx 3 feet of medium silicone ho...
  • Vector Airspeed Expander with Pitot
    Vector Airspeed Expander with Pitot
    The Airspeed Expander allows you to measure true airspeed with your Vector, which complements the ground speed reading with your GPS sensor. The Airspeed MicroSensor uses a Prandtl style pitot-static... The Airspeed Expander allows you to measure true airspeed with your Vector, whi...
  • Eagle Tree Magnets
    Eagle Tree Magnets
    Extra Magnets for the Hall Effects Magnetic RPM Sensor  *Compatible with both eLogger and Data Recorder. Extra Magnets for the Hall Effects Magnetic RPM Sensor  *Compatible w...
  • eLogger V4 100A with Wire Leads
    eLogger V4 100A with Wire Leads
    This is the 100 amp e-Logger V4 On-Board Data Logger from Eagle Tree Systems. FEATURES Great for planes, helis, car, trucks and boats Accepts optional inexpensive sensors for GPS, temperature, RPM... This is the 100 amp e-Logger V4 On-Board Data Logger from Eagle Tree Systems. F...
  • External GPS Antenna
    External GPS Antenna
    This tiny external antenna is great if you need to mount your GPS Expander under carbon fiber, or in other "RF challenging" locations.    The Expander will pick between the... This tiny external antenna is great if you need to mount your GPS Expander unde...
  • Extra Receiver Connection Harness for Guardian 2D/3D Stabilizer
    Extra Receiver Connection Harness for Guardian 2D/3D Stabilizer
    Looking to move your Guardian 2D/3D Stabilizer from plane to plane but don't want to move the cables?  An extra reciever harness can solve that issue!   Leave the harness installed and... Looking to move your Guardian 2D/3D Stabilizer from plane to plane but don'...
  • Gforce 3-Axis 38+G MicroSensor
    Gforce 3-Axis 38+G MicroSensor
    Need to know how many G's you pulled in that last barrel roll? Eagle Tree is pleased to offer the world's first standalone G-Force meters for RC models. The high G sensor measures up to 40g... Need to know how many G's you pulled in that last barrel roll? Eagle Tree i...
  • Replacement Custom USB CABLE
    Replacement Custom USB CABLE
      Replacement Custom USB Cable (USB-CABLE) Extra 1 meter (approx 3') long USB cable. – If you need more information, use these Eagle Tree Systems resources – E-mail:...   Replacement Custom USB Cable (USB-CABLE) Extra 1 meter (approx 3') l...
     $5.99$8.49 -29%

  • Video OSD Pro Expander
    Video OSD Pro Expander
    This is the Eagle Tree Systems Video OSD Pro Expander. The OSD Pro is the ultimate on-screen display for your FPV (First Person View) equipped recreational model airplane, heli, car or boat! The OSD... This is the Eagle Tree Systems Video OSD Pro Expander. The OSD Pro is the ultim...