E-Max
-
BABYHAWK-R 3IN RACE(R) EDITION 136MM MINI F3 MAGNUM (PNP)
Introducing the Babyhawk R, made by racers for racers. Features: -High-Speed power system featuring RS1106 and the AVAN MINI... Introducing the Babyhawk R, made by racers for racers. Features: -High-Speed po... -
BABYHAWK 2IN RACE (R) EDITION FPV QUADCOPTER (PNP)
Introducing the Babyhawk R, made by racers for racers. Features: -High-Speed power system featuring RS1106 and the Avan Micro -FC/ESC AIO -... Introducing the Babyhawk R, made by racers for racers. Features: -High-S... -
50mm PAGODA 2 ANTENNA 5.8GHZ LHCP OMNIDIRECTIONAL SMA (2PCS)
Introducing the Emax “Pagoda II” by design by Maarten Baert. This thoughtfully designed circular polarized antenna utilizes a 3 tiered 1... Introducing the Emax “Pagoda II” by design by Maarten Baert. This t... -
80mm PAGODA 2 ANTENNA 5.8GHZ LHCP OMNIDIRECTIONAL SMA (2PCS)
Introducing the Emax “Pagoda II” by design by Maarten Baert. This thoughtfully designed circular polarized antenna utilizes a 3 tiered 1... Introducing the Emax “Pagoda II” by design by Maarten Baert. This t... -
50mm PAGODA 2 ANTENNA 5.8GHZ RHCP OMNIDIRECTIONAL SMA (2PCS)
Specs: Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.55 – 6.05 GHz) Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency) Axial... Specs: Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.55 – 6.05 GHz) ... -
80mm PAGODA 2 ANTENNA 5.8GHZ RHCP OMNIDIRECTIONAL SMA (2PCS)
Specs: Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.55 – 6.05 GHz) Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency) Axial... Specs: Center frequency: 5.8 GHz Bandwidth: 500 MHz (5.55 – 6.05 GHz) ... -
NighHawk 250 V2 Carbon Fiber Quadcopter Combo Kit (Green)
Nighthawk 250 II Carbon Fiber Mini Quadcopter Combo. This combo pack comes with the all carbon fiber frame, 4x MT2204 KV2300 motors (CW/CCW),... Nighthawk 250 II Carbon Fiber Mini Quadcopter Combo. This combo pack come... -
EMAX AVAN-R Propeller 10 SETS (CW/CCW) Yellow (AVAN)
The latest propeller by EMAX to take the most important aspect of drone performance and redesign it from the ground up. What can only be described as... The latest propeller by EMAX to take the most important aspect of drone perform... -
EMAX AVAN-R Propeller 10 SETS (CW/CCW) Green (AVAN)
The latest propeller by EMAX to take the most important aspect of drone performance and redesign it from the ground up. What can only be described as... The latest propeller by EMAX to take the most important aspect of drone perform... -
T2345 3-BLADE PROPELLERS 10 SETS (CW/CCW) BLUE
EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250KV MOTORS. EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250K... -
T2345 3-BLADE PROPELLERS 10 SETS (CW/CCW) CLEAR
EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250KV MOTORS. EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250K... -
T2345 3-BLADE PROPELLERS 10 SETS (CW/CCW) RED
EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250KV MOTORS. EMAX T2345 PROP SETS 3-BLADE PROPELLERS, WORKS GREAT WITH BABYHAWK RS1104 5250K... -
EMAX LIGHTNING 30A ESC
The first BLHeli ESC with Synchronous Rectification hardware design in the market Utilizes high-performance F396 MCU Lightweight: 5.5g including... The first BLHeli ESC with Synchronous Rectification hardware design in the mark... -
F4 Magnum Flight Controller Main Board 6 In 1 - Tower Parts
Flight controller (OMNIBUSF4 Firmware) STM32F405 MCU MPU6000 accelerometer/gyro (connected via SPI) On-board Betaflight OSD On-board... Flight controller (OMNIBUSF4 Firmware) STM32F405 MCU MPU6000 accelerometer/gyro... -
F4 MAGNUM TOWER PARTS - BULLET 30A 4 IN 1 ESC BOARD
Continuous current 30A and 40A burst per motor Supply voltage 2-4S Lipo Silabs EFM8BB21F16G 50mhz MCU BLHeli_S firmware Supports D-SHOT,... Continuous current 30A and 40A burst per motor Supply voltage 2-4S Lipo Silabs ... -
**EMAX SKYLINE32 + OSD FLIGHT CONTROLLER (ACRO)
Skyline 32 Flight Controller + on board OSD to simplify your FPV build. No need for unreliable external OSD modules anymore. With a simple flick of a... Skyline 32 Flight Controller + on board OSD to simplify your FPV build. No need... -
**Emax Skyline32 Mini Flight Controller (advanced V1.1)
The skyline32 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users.... The skyline32 runs the open-source Cleanflight flight control (FC) software whi... -
EMAX POWER DISTRIBUTION BOARD V2 5V/12V - EMX-AC-1623
This power distribution board features with 2 BEC outputs. With extra-thick copper foil, ENIG surface, it supports a current of up to 100A. 12V BEC... This power distribution board features with 2 BEC outputs. With extra-thick cop... -
FC-1710 F3 FEMTO FLIGHT CONTROLLER
Please note that Babyhawk Femto has a rear facing USB port, where as the standard Femto has the USB port is has a USB facing the side of the board... Please note that Babyhawk Femto has a rear facing USB port, where as the standar... -
EMAX SKYLINE F3+OSD FLIGHT CONTROLLER (ACRO)
Skyline F3 Flight Controller + on board OSD to simplify your FPV build. No need for unreliable external OSD modules anymore. With a simple flick of a... Skyline F3 Flight Controller + on board OSD to simplify your FPV build. No need... -
EMAX BUZZER FOR SKYLINE32 FLIGHT CONTROL
Specs: Suitable for: Skyline32 flight controller Acro & Advanced version. Weight: 2.1g Dimensions (Buzzer): 9 x 11.8mm Wire Length: 115mm ... Specs: Suitable for: Skyline32 flight controller Acro & Advanced version. ... -
EMAX RGB Led Light for SKYLINE32 Flight Controller
RGB Led for the Emax SKYLINE32 Flight Controller (5V). Mounted on a PCB Board with securing holes please see picture. Easily configure various... RGB Led for the Emax SKYLINE32 Flight Controller (5V). Mounted on a PCB Board w... -
E-max Nano 12a ESC with OneShot 125
EMAX Nano Series ESCs are developed for racing multicopters, based on BLHeli firmware and support OneShot125. They are compatible with Skyline32,... EMAX Nano Series ESCs are developed for racing multicopters, based on BLHeli fi... -
*Emax ESC 20A with BLHeli Firmware (One Shot125 Support)
EMAX ESCs are developed for racing multicopters, based on BLHeli firmware and support OneShot125. They are compatible with Skyline32, Naze32,... EMAX ESCs are developed for racing multicopters, based on BLHeli firmware and s... -
Nighthawk X5 Racing Frame
The Nighthawk X5 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance... The Nighthawk X5 are EMAX’s first pure X frames with equ... -
Nighthawk X6 Racing Frame
The Nighthawk X6 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance... The Nighthawk X6 are EMAX’s first pure X frames with equ... -
Nighthawk HX170 Frame
The Nighthawk HX170 Quadcopter Frame is an indispensable component of the FPV quadcopter. Designed and optimized for a better performance, it... The Nighthawk HX170 Quadcopter Frame is an indispensable component of the FPV q... -
E-MAX RS2205-2600Kv RaceSpec Motor (CW)
Introducing the Emax Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better... Introducing the Emax Race Spec family of high performance brushless motors for ... -
E-MAX RS2205-S (2600kv) RACE SPEC BRUSHLESS MOTOR
The completely redesigned RS2205-S is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational... The completely redesigned RS2205-S is upgraded with features racing multirotors... -
EMAX RS2205-2600Kv RaceSpec Motor (CCW)
This motor can be used as either clockwise (CW) or counter-clockwise (CCW) as it comes with a locking nut. Introducing the Emax Race Spec family of... This motor can be used as either clockwise (CW) or counter-clockwise (CCW) as i... -
**E-Max 1806-2280Kv Motor (CCW)
Framework: 12N14P KV: 2280Kv Length: 26.7 mm Diameter: 23 mm No. of cells: 2-3S Max.thrust: 460g Shaft: 2 mm Propeller: 5"- 6" ... Framework: 12N14P KV: 2280Kv Length: 26.7 mm Diameter: 23 mm No. of cells: 2-3S... -
**E-Max 1806-2280Kv Motor (CW)
Framework: 12N14P KV: 2280Kv Length: 26.7 mm Diameter: 23 mm No. of cells: 2-3S Max.thrust: 460g Shaft: 2 mm Propeller: 5"- 6" ... Framework: 12N14P KV: 2280Kv Length: 26.7 mm Diameter: 23 mm No. of cells: 2-3S... -
EMAX ES08A-II ANALOG MICRO SERVO
Servo Usage: For Airplane Servo Type: Analog Servo Gear Type: Plastic Servo Size : Micro Servo Usage: For Airplane Servo Type: Analog Servo Gear Type:  ... -
EMAX ES08D SERVO
... -
EMAX ES09MD SERVO
Good News! Emax has designed a series of specific swash servos for 450 helicopters. And now you will be able to have high-quality swash servo for... Good News! Emax has designed a series of specific swash servos for 450 helicopt... -
Nighthawk 200 All Carbon Fiber Quadcopter Aircraft Frame (4MM)
Features: - A unibody main frame board made of 4mm pure carbon fiber to ensure durability. - Equipped with motor protection mounts to... Features: - A unibody main frame board made of 4mm pure carbon fiber to en... -
Nighthawk 170 - Replacement Lower Board (3MM)
This is a new replacement lower frame board for your Nighthawk 170 frame. Package Includes: - 1 x Nighthawk 170 Lower Frame Board (3MM) This is a new replacement lower frame board for your Nighthawk 170 frame. Packa... -
Nighthawk 200 - Replacement Front Board (4MM)
This is a new replacement front frame board for your Nighthawk 200. Package Includes: - 1 x Nighthawk 200 Front Frame Board (4MM) This is a new replacement front frame board for your Nighthawk 200. Packag... -
*CC3D Mini Power Distribution Board (No BEC)
Description: Item Name: Power Distribution Board Weight: Approx. 3.5g Usage : for CC3D flight controller power distribution Features: Mini... Description: Item Name: Power Distribution Board Weight: Approx. 3.... -
*Nighthawk Pro 280 - Replacement Camera Mounting Plate
This is a new replacement camera mounting plate for your Nighthawk Pro 280 quadcopter. Package Includes: - 1x Mounting Plate - 1x M2 5x8 Nylon... This is a new replacement camera mounting plate for your Nighthawk Pro 280 quad... -
AVAN BABYHAWK 2.3 INCH PROPELLER (CW + 6 CCW) Black
The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch... The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of yo... -
AVAN BABYHAWK 2.3 INCH PROPELLER (CW + 6 CCW) Blue
The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch... The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of yo... -
AVAN BABYHAWK 2.3 INCH PROPELLER (CW + 6 CCW) Clear
The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch... The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of yo... -
AVAN BABYHAWK 2.3 INCH PROPELLER (CW + 6 CCW) Red
The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch... The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of yo... -
AVAN MICRO 2 INCH PROPELLER (6CW + 6CCW) Clear
The EMAX AVAN micro was designed to take your micro to the furthest limits. Made for high speed and ultimate control, a 2-inch quad blade prop... The EMAX AVAN micro was designed to take your micro to the furthest limits. Mad... -
AVAN MICRO 2 INCH PROPELLER (6CW + 6CCW) Red
The EMAX AVAN micro was designed to take your micro to the furthest limits. Made for high speed and ultimate control, a 2-inch quad blade prop... The EMAX AVAN micro was designed to take your micro to the furthest limits. Mad... -
E-max 1806 Prop Adapter
Emax 1806 Motor CCW Prop Adapter Emax 1806 Motor CCW Prop Adapter ... -
E-max 1806 Prop Adapter
1 CW Prop Adapter for Emax 1806 brushless motor. 1 CW Prop Adapter for Emax 1806 brushless motor. ... -
E-max 2206 CCW Prop Adapter
Emax 2206 brushless motor prop adapter Emax 2206 brushless motor prop adapter ...
New Products For December
- $14.95
5.8GHz ION V2 STUBBY ANTENNA RHCP (...
The Ion V2 sacrifices no performance from the original version of the Ion but is over... - $19.95
5.8GHz RHCP Minion PRO Antenna (MMC...
The Minion features a more compact size (half as large) and slightly reduced gain tha... - $19.95
5.8GHz RHCP Minion PRO Antenna (u.F...
The Minion features a more compact size (half as large) and slightly reduced gain tha... - $89.99
3.4GHz Pepperbox (RHCP) PB-3400-R -...
3.4GHz Pepperbox (RHCP) Designed specifically for the long range wanderer, the Pep...