The new BASE SD goggles are one of the best options available for bound video piloting. Easy to use controls can be operated without removing the goggles. Now with a 35 degree field of view! The BASE SD uses the same polarized backlight technology as the ever-popular Dominator goggles.
The BASE SD FPV Goggles provides features that are not found on common video goggles including filtering to remove video noise from 433Mhz and 2.4Ghz UHF radios and a video sync tip signal conditioner to tolerate poor video inputs.

Specifications:
Optics
FOV 35 Degrees Diagonal
Interpupillary (IPD) distance: 59-69mm (adjustable)
Optional diopter lens inserts available in -2, -4, -6
Audio
Stereo
Electrical
Power input: 7-13V (2s/3s supply)
Power Consumption @12VDC: 100mA
User Controls
Contrast/brightness
System
NTSC/PAL Auto Select
Mechanical
Ergonomic molded shape
Secured rubber eye cups for ambient light reduction
Weight: 120g
Adjustable headband
Display
Two full color micro VGA LCD's (640x480)
Resolution 922,000 pixels per eye
Interface
6p Square Futaba for AV and power
3.5mm 3p Earphone port
Kit includes
BASE SD Video Goggles
Hard protective case
3m AV cable (for connecting to external receivers)
DC Power Cable
Form fitting silicone eye cups
Note: Battery sold separately as this unit is typically tethered to a ground station.
If you want to share the power supply with your ground station, the included cable allows for that.  You simply feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the included cable, and then plug the extra power plug included on the cable into your video receiver/ground station so you are powering both devices with the same battery. (2-3s lipo)

Note: returned by customer and in like new condition and has been fully tested. It carries the warranty from the manufacturer.