Product 32/56


The Furious Mini RX for Frsky is designed for micro quads such as Toretto 130.

Specifications:
Mini size: 17x24 mm.
- Weight: 2.11g 
- Operating Range: 500m.
- S-bus output without inverted (don’t need inverted on FC).
- Channels:
- Telemetry HUB.
- Input voltage: 4-6V (normal 5V).
- Compatibility: FrSky Taranis, Taranis Plus, & XJT module

NOTE: Regarding F3 chip, you need go to CLI on cleanflight and
set sbus_inversion = OFF
- save

Configuration:

Here are some useful tips for the setup and use of your Furious Mini RX:

1. Binding the receiver to the Frsky Taranis:
- In the Taranis, go to MODE SETUP (page 2) in the model configuration.
- Go to Mode inside Internal RF and select D8.
- Press and hold the receiver bind button and plug your battery in to turn the receiver on.
- Release the button. A green LED lights up in the receiver.
- Going back to the Taranis; we press BIND. The transmitter beeps, indicating it’s in bind mode.
- Wait for the green LED on the receiver to turn off. The binding procedure has finished.
- Exit the BIND mode in the Taranis.
- Unplug the battery to turn off the receiver.

2. Binding the receiver to the XJT module:
- Using the dip switches of the XJT module, select the D8 mode. They shoud be in the following position: switch 1 = ON, switch 2 = OFF.
- Press and hold the receiver bind button and plug your battery in to turn the receiver on.
- Release the button. A green LED lights up in the receiver.
- Press and hold the bind button and turn the transmitter on.
- Release the button. A green light shoud blink in the module, indicating it’s in bind mode.
- Wait for the green LED on the receiver to turn off. The binding procedure has finished.
- Turn the transmitter off.
- Unplug the battery to turn off the receiver. 

3. Receiver Configuration in the Cleanflight configurator:
- In the PORTS PORTS tab, select the UART that corresponds to the receiver (usually UART3 in F3 flight controllers) and activate Serial RX.
- Save by clicking on the Save and Reboot button.
- In the CONFIGURATION tab, in the Receiver Mode section, select RX_SERIAL.
- In the same tab, in the Serial Receiver Provider section, select SBUS.
- Save by clicking on the Save and Reboot button.
- Go to CLI and type the following commands: set sbus_inversion = OFF
- save
- The FC will reboot, applying the change.
- Go to the RECEIVER tab and make sure the receiver acts like it should.

4. Telemetry Configuration:
- In the PORTSPORTS tab, select the UART that corresponds to the telemetry (usually UART2 in F3 flight controllers) and select FrSky in Telemetry. Leave the baudrate to AUTO.
- Go to CLI, and type the following commands: set telemetry_inversion = OFF
- save
- The FC will reboot, applying the change.
- Make sure you’re getting thetelemetry values in our Taranis correctly.

Video:

Furious Mini Receiver for FrSky Radios

Product SKU: 4058-PB

Status : Back Ordered (Ships as soon as available)

Current Reviews: 0

CLICK HERE to be notified when this product is back in stock.

$22.95
Max: 3
Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Furious Mini Receiver for FrSky Radios” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!