Your cart is empty
ImmersionRC
-
Vortex Fusion FC/OSD PCB
The Fusion is the heart of the ImmersionRC Vortex quadcopter. A single PCB containing two 32-bit ARM processors, one running the flight controller, one running the OSD. Use only as a... The Fusion is the heart of the ImmersionRC Vortex quadcopter. A single PCB cont... -
EzUHF Long Range Radio Control Transmitter
If you're looking to extend the range of your RC radio transmitter to further with your RC model, then we the EZUHF is one of the best options available in the market. It's... If you're looking to extend the range of your RC radio transmitter to ... -
*EZUHF RX LITE 8 Channel Long Range Receiver
The EzUHF R/C control system is a reliable R/C control up link for FPV and UAV pilots who desire a robust control system for safe control at longer distances. It was designed with the FPV/ UAV pilot... The EzUHF R/C control system is a reliable R/C control up link for FPV and UAV ... -
EzUHF 8 Channel 433 MHz Diversity Receiver (Refurbished)
The EzUHF 8-ch receiver which supports a diversity antenna configuration, EzOSD connectivity and is no bigger than a standard 8-ch RC receiver, nor any heavier at just 18-grams. Sporting an... The EzUHF 8-ch receiver which supports a diversity antenna configuration, EzOSD... -
EzUHF JR Module Transmitter (Refurbished)
NOTE: This product has been refurbished by the manufacturer (all warranties apply). EZUHF JR MODULE TRANSMITTER JR Module, compatible with the Hobby King 9xR, and... NOTE: This product has been refurbished by the manufacturer (all warrant... -
I-telemetry Dongle
iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your model's position on a live map, while viewing critical flight parameters; Battery status, Uplink status (EzUHF... iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your ... -
SpiroNet 5.8 GHz Antenna LHCP (SMA)
This are LEFT hand circularly polarized antennas If you need RIGHT hand circularly polarized antennas please click here. New SpiroNET 5.8GHz circular polarized... This are LEFT hand circularly polarized antennas If you need RIGHT h... -
SpiroNet 5.8 GHz LHCP Antenna (RP-SMA Male)
New Reverse Polarity SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark. This set has been redesigned and includes two 4... New Reverse Polarity SpiroNET 5.8GHz circular polarized ante... -
SpiroNet 5.8 GHz LHCP Patch Antenna (SMA)
This is a LEFT hand circularly polarized antenna If you need a RIGHT hand circularly polarized patach antenna please click here. This 5.8GHz Circularly Polarized patch antenna was... This is a LEFT hand circularly polarized antenna If you need a RIGHT hand... -
5v to 12v Step Up from ImmersionRC and Fatshark Transmitters
This tiny voltage regulator will provide regulated 12VDC from a 5V to 12V source. Ideal for powering 12V cameras from the 5V camera power output that is available on ImmersionRC and Fatshark 5.8GHz... This tiny voltage regulator will provide regulated 12VDC from a 5V to 12V sourc... -
Immersion RC Vortex Camera Bumper
Replacement front bumper for the Immersion RC Vortex. The Camera Bumper is made from 1.5mm FR4, with an updated design which is more robust than the stock bumper. Replacement front bumper for the Immersion RC Vortex. The Camera Bumper i... -
ImmersionRC Uno 5.8 GHz A/V Race Edition Receiver
ImmersionRC's newest version of their popular 5.8GHz receiver, the Uno 800 V4 now with 40 channels including RaceBand. This receiver includes the popular Fatshark/ImmersionRC... ImmersionRC's newest version of their popular 5.8GHz receiver, the Uno 800 ... -
IMRC EZ Antenna Tracker
Point high-gain antennas at FPV models using GPS-based telemetry data from the model itself. Greatly increases range and video quality for video gear. Drive standard hobby servos for pan, and... Point high-gain antennas at FPV models using GPS-based telemetry data from the ... -
Sander Style 433 MHz Antenna
Single 'Sander Style' Monopole antenna, for the 433MHz band, suitable for use with EzUHF Receivers. Specifications: Length: 164mm Connector: SMA Frequency: 430 - 440Mhz Single 'Sander Style' Monopole antenna, for the 433MHz band, suitable f... -
SpiroNet 5.8 GHz RHCP Patch Antenna - SMA Male (Refurbished)
NOTE: This product has been refurbished and tested by the manufacturer (All warranties apply). This 5.8GHz Circularly Polarized patch antenna was custom-designed, with no expense spared, for... NOTE: This product has been refurbished and tested by the manufacturer (All war... -
Vortex 12 Amp ESC
The EzESC is a replacement for the ESC used in the Vortex quadcopter. Only 9.4mm wide, it fits nicely into the carbon fibre arm tubes used in the Vortex. 12A continuous, 16A peak, with... The EzESC is a replacement for the ESC used in the Vortex quadcopter. Onl... -
Vortex Crash Kit 1 (Plastic)
These are the parts most likely to break in a serious crash. Included are all parts which mount the motors to the carbon fiber arms, the plastic pivot points, foldable arm clips, and all other... These are the parts most likely to break in a serious crash. Included are... -
Vortex GoPro Recliner Kit
The Vortex Gopro Recliner Kit Includes: 1x Baseplate (Carbon Fiber) 1x Back Plate (Carbon Fiber) 2x 30 degree Side Plate (Carbon Fiber) 4x M3 Aluminium Nut 4x M3 Aluminium Screw 4x M3 T-Nuts 1x... The Vortex Gopro Recliner Kit Includes: 1x Baseplate (Carbon Fiber) 1x Bac... -
Vortex LED PCB
The LED board sits in the rear of the Vortex quadcopters. It includes 8x RGB LEDs, controlled by a 32-bit ARM processor, which communicates with the Vortex Fusion FC/OSD board. Use only as a... The LED board sits in the rear of the Vortex quadcopters. It includes 8x RGB LE... -
Vortex Metal Arm Mount Upgrade
After upgrading with this kit, the Vortex arms no longer fold, but instead are very rigidly mounted to the frame. Includes: - 8x Anodized, CNC Milled, Top Clamp - 8x Anodized, CNC... After upgrading with this kit, the Vortex arms no longer fold, but instead are ... -
Vortex Mobius Incliner Kit
Vortex Mobius Incliner Kit An updated anti-jello plate for the Vortex, which inclines the Mobius by 20 degrees, for optimal camera angle when flying at speed. Includes: 1x... Vortex Mobius Incliner Kit An updated anti-jello plate for the Vortex, which i... -
XuGong Black Dampeners (8 pcs)
XuGong Black Dampeners 8PCS XuGong Black Dampeners 8PCS ... -
XuGong Red Dampeners (8 pcs)
XuGong Red Dampeners 8PCS XuGong Red Dampeners 8PCS ... -
XuGong Rubber Feet
XuGong Rubber Feet XuGong Rubber Feet ...
New Products For June
$49.952.4GHz 3 Turn Helical 7.5DBIC (RHCP...
The Helical antenna is an excellent general purpose video receiver antenna. ...
$8.99XuGong Dampeners (Red)...
A pack of 8 red dampeners for the Xugong-8 Xugong-10. The red dampeners are made o...
$27.99FrSky - TFRSP Receiver...
FEATURES: Up to 10 channels (CPPM for CH1~CH9, servo signal for CH5~CH10) Wit...
$11.99FrSky Lipo Voltage Sensor FLVS-01...
The FrSky Lipo Voltage Sensor features a colorful, easy to read OLED display screen. ...
$38.99IBCrazy 1.3GHz Cloverleaf Whip Ante...
The 1.3Ghz cloverleaf whip antenna from IBCrazy is a circular polarized omn...
$79.99Iron Horse 3.3-3.4GHz 2 Channels 0....
The Iron Horse V2 now comes with the dual output 500/1000mW, giving the user the poss...-
$79.99
Iron Horse 3.3-3.4GHz 8 Channels 0....
The Iron Horse V2 now comes with the dual output 500/1000mW, giving the user the poss...