OSD - APM - RADIO TELEMETRY

  • Piggy OSD V2 for Race Flight FC
    Piggy OSD V2 for Race Flight FC
    Furious FPV Piggy OSD V2 - Making the Competition Squeal! The FuriousFPV team continues to push the boundaries of FPV flight with an obsessive goal of innovation without compromise. As they push... Furious FPV Piggy OSD V2 - Making the Competition Squeal! The FuriousFPV team c...
  • Piggy OSD V2 for Kiss FC
    Piggy OSD V2 for Kiss FC
    Furious FPV Piggy OSD V2 - Making the Competition Squeal! The team at Furious continues to push the boundaries of FPV flight with an obsessive goal of innovation without compromise. As they push... Furious FPV Piggy OSD V2 - Making the Competition Squeal! The team at Furious c...
  • Piggy OSD V2 for Beta Flight FC
    Piggy OSD V2 for Beta Flight FC
    The FuriousFPV team continues to push the boundaries of FPV flight with an obsessive goal of innovation without compromise. As they push the limits of innovation and design, their latest... The FuriousFPV team continues to push the boundaries of FPV flight with an obse...
  • MICRO MINIM OSD
    MICRO MINIM OSD
    The Micro MinimOSD with all the features of the very popuar WiteSpy KV Team modded OSD but in a 16x16mm size.  Doesn't have the DC/DC converter, this means less heat when powered off a... The Micro MinimOSD with all the features of the very popuar WiteSpy KV Team mod...
  • Vortex Fusion FC/OSD PCB
    Vortex Fusion FC/OSD PCB
    The Fusion is the heart of the ImmersionRC Vortex quadcopter. A single PCB containing two 32-bit ARM processors, one running the flight controller, one running the OSD.  Use only as a... The Fusion is the heart of the ImmersionRC Vortex quadcopter. A single PCB cont...
  • DRAGON OSD GPS NAVIGATION SYSTEM MAIN BOARD ONLY
    DRAGON OSD GPS NAVIGATION SYSTEM MAIN BOARD ONLY
    The Dragon OSD+ v2 is the newest analog OSD from DragonLabs. It provides a light and low cost board, but high quality display and a very long list of features. Knowledge is required to assemble and... The Dragon OSD+ v2 is the newest analog OSD from DragonLabs. It provides a ligh...
  • APM 2.8 Flight Controller Board with Shock Absorber
    APM 2.8 Flight Controller Board with Shock Absorber
      This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM 2.6, however, this version does not have an onboard compass which makes this version ideal for use...   This is the new APM 2.8 autopilot module. The sensors are exactly the sa...
  • YKS 3DR Radio Telemetry 915Mhz APM
    YKS 3DR Radio Telemetry 915Mhz APM
    The YKS 3DR Radio Telemetry 915Mhz has a very small size, light weight (about 4 grams without antenna). It transmits power up to 20dBm (100mW), air data rates up to 250kbps.It also... The YKS 3DR Radio Telemetry 915Mhz has a very small size, light weight (about 4...
  • 3dr Radio Telemetry 433 MHz
    3dr Radio Telemetry 433 MHz
    Radio Features: Very small size Light weight (under 4 grams without antenna) Receiver sensitivity to -121 dBm Transmit power up to 20dBm (100mW) Transparent serial link Air data rates up to 250kbps... Radio Features: Very small size Light weight (under 4 grams without antenna) Re...
  • I-telemetry Dongle
    I-telemetry Dongle
    iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your model's position on a live map, while viewing critical flight parameters; Battery status, Uplink status (EzUHF... iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your ...
     $14.99$19.99 -25%

  • **DJI MKll OSD (On Screen Display)
    **DJI MKll OSD (On Screen Display)
    With DJI mature reliable sensor technology, iOSD MARK II can collect precise & real-time flight data and transmit to the ground end via video link in the most clear digital and graphical... With DJI mature reliable sensor technology, iOSD MARK II can collect precise &a...
     $210.37$254.89 -17%

  • Cyclops Tornado OSD "HUD" with GPS (Complete Set)
    Cyclops Tornado OSD "HUD" with GPS (Complete Set)
    CYCLOPS TORNADO OSD w/GPS The new Tornado OSD is has many great features to enhance your FPV experience. You can find all details and features on the manual. Watch video reviews.   ... CYCLOPS TORNADO OSD w/GPS The new Tornado OSD is has many great features to en...
  • Cyclops Wired Remote Control Board for Storm OSD
    Cyclops Wired Remote Control Board for Storm OSD
    CYCLOPS REMOTE CONTROL BOARD FOR THE STORM OSD Replacement wired remote control board for the Storm OSD CYCLOPS REMOTE CONTROL BOARD FOR THE STORM OSD Replacement wired remote control...
  • VECTOR Flight Controller with Color OSD (DEANS)
    VECTOR Flight Controller with Color OSD (DEANS)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • VECTOR Flight Controller with Color OSD (WIRE LEADS)
    VECTOR Flight Controller with Color OSD (WIRE LEADS)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • VECTOR Flight Controller with Color OSD (XT-60)
    VECTOR Flight Controller with Color OSD (XT-60)
    VECTOR FPV SYSTEM   The Vector has everything you've dreamed about, in one small, lightweight product: Built-in OSD with COLOR GRAPHICS! FIXED WING and MULTIROTOR Flight Controller with... VECTOR FPV SYSTEM   The Vector has everything you've dreamed abo...
  • Complete OSD PRO V4 100A (Connectors)
    Complete OSD PRO V4 100A (Connectors)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • Complete OSD PRO V4 100A (Leads)
    Complete OSD PRO V4 100A (Leads)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • Complete OSD PRO V4 150A (Leads)
    Complete OSD PRO V4 150A (Leads)
      We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high...   We’re pleased to introduce the Eagle Tree OSD Pro.The OSD Pro disp...
  • eLogger V4 with Integratrated Connectors (MPRV-CONN-100)
    eLogger V4 with Integratrated Connectors (MPRV-CONN-100)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 1...
  • eLogger V4 with Wire Leads 80V 100A (MPRV-LEADS-100)
    eLogger V4 with Wire Leads 80V 100A (MPRV-LEADS-100)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 1...
  • eLogger V4 with Wire Leads 80V 150A (MPRV-LEADS-150)
    eLogger V4 with Wire Leads 80V 150A (MPRV-LEADS-150)
      Here are the key features of the eLogger V4: Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts Current is measured with a true Hall...   Here are the key features of the eLogger V4: Logs pack current to +/- 10...
  • PowerPanel lightweight LCD Display
    PowerPanel lightweight LCD Display
    Now you can connect our PowerPanel lightweight LCD Display module to your eLogger! This ultra thin LCD display connects to the eLogger with the included 11" data cable, and lets you get your max... Now you can connect our PowerPanel lightweight LCD Display module to your eLogg...
  • Vector Info LCD Panel
    Vector Info LCD Panel
    The InfoPanel LCD display makes it easy to check the status of your Vector equipped model and configure settings at the field, without needing to use laptop or video goggles. Check out these... The InfoPanel LCD display makes it easy to check the status of your Vector equi...
  • ALTITUDE - Altimeter Microsensor V4
    ALTITUDE - Altimeter Microsensor V4
    The Eagletree new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data... The Eagletree new Airspeed and Altitude MicroSensors have two modes: they work ...
  • 3-Axis G-Force MicroSensors 7 +Gs
    3-Axis G-Force MicroSensors 7 +Gs
    Eagle Tree is pleased to offer the world's first standalone G-Force meter for RC models.  The tiny,  low cost sensor measures up to 7 +Gs in the X, Y, and Z axes during flight, and the... Eagle Tree is pleased to offer the world's first standalone G-Force meter ...
  • Alerter/Buzzer With LED for Vector
    Alerter/Buzzer With LED for Vector
    Small and lightweight, the powerful Alerter Buzzer/LED provides important audiovisual information about your Vector equipped model's status.   Great for use when flying either FPV or LOS.... Small and lightweight, the powerful Alerter Buzzer/LED provides important audio...
  • Brushless RPM Sensor
    Brushless RPM Sensor
    Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a splice (not inline) which simplifies installation. ... Tiny sensor measures RPM by simply connecting a wire from one of your brushless...
  • Dual Axis G-Force Expander (GFORCE-38)
    Dual Axis G-Force Expander (GFORCE-38)
    G-Force Expander (GFORCE-38) Measures dual axis acceleration and G-force up to +/- 38 G's. Click here to view Instruction Manual (PDF) Click here for info on using more than one G-Force... G-Force Expander (GFORCE-38) Measures dual axis acceleration and G-force up to ...
  • Electric Expander - 100 Amp (ELEC-EXP-100)
    Electric Expander - 100 Amp (ELEC-EXP-100)
          Description: Electric Expander - 100 Amp (ELEC-EXP-100) Measures motor battery pack current and voltage. Electric Expander Specifications: Pack Voltage: 0 to 50V Pack Current: 0...       Description: Electric Expander - 100 Amp (ELEC-EXP-100) M...
  • Electric Expander - 140 Amps
    Electric Expander - 140 Amps
          Description: Electric Expander - 140 Amp Measures motor battery pack current and voltage. Electric Expander Specifications: Pack Voltage: 0 to 50V Pack Current: 0 to 140 Amps,...       Description: Electric Expander - 140 Amp Measures motor b...
  • Micro Temp Sensor (TEMP-MICRO)
    Micro Temp Sensor (TEMP-MICRO)
    Perfect for measuring temps of your batteries and ESC. 250 degrees F max temp. Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2). ... Perfect for measuring temps of your batteries and ESC. 250 degrees F max temp. ...
  • Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM)
    Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM)
      Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM) Meeasures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling...   Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM) Meeasures your RPM...
  • Temperature Sensor (TEMP-LOOP)
    Temperature Sensor (TEMP-LOOP)
    Temperature Sensor (TEMP-LOOP) Loop-around temperature sensor measures temp up to 420 degrees F. Great for looping around motors. NEW: Up to three temperature sensors can be connected to the eLogger... Temperature Sensor (TEMP-LOOP) Loop-around temperature sensor measures temp up...
     $8.49$6.99 --21%

  • 12" (300mm) Extended Receiver Connection Harness (VECTOR)
    12" (300mm) Extended Receiver Connection Harness (VECTOR)
      Extended Length Six channel receiver connection harness (12"/300mm)   Extended Length Six channel receiver connection harness (12"/300mm)...
  • 4" Vector Receiver Connection Harness
    4" Vector Receiver Connection Harness
    A replace cable for your vector system and is shorter than original cable  4 in long A replace cable for your vector system and is shorter than original cable ...
  • Battery Backup Harness (CAB-BAT-BACK)
    Battery Backup Harness (CAB-BAT-BACK)
      Description: Battery Backup Harness (CAB-BAT-BACK) Lets you power your eLogger from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.5 v. Note that the eLogger...   Description: Battery Backup Harness (CAB-BAT-BACK) Lets you power your...
  • Cable for Data Recorder & MicroPower eLogger (CAB-Y-1)
    Cable for Data Recorder & MicroPower eLogger (CAB-Y-1)
    Custom Y Cable for Throttle Logging (CAB-Y-1) Monitor Throttle or other servo movements with your eLogger V3!   – If you need more information, use these Eagle Tree Systems resources... Custom Y Cable for Throttle Logging (CAB-Y-1) Monitor Throttle or other servo ...
  • Expander Extension Cable (CAB-EXP-EXT)
    Expander Extension Cable (CAB-EXP-EXT)
      12” (30 cm) 4 pin extension cable for our Expander – If you need more information, use these Eagle Tree Systems resources – E-mail: sales@eagletreesystems.com Web...   12” (30 cm) 4 pin extension cable for our Expander – If yo...
  • Male RCA to Servo Connector Adapter Cable for OSD Expander
    Male RCA to Servo Connector Adapter Cable for OSD Expander
      NEW: RCA to Servo Connector Adapter Cable for OSD Expander Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA. – If you...   NEW: RCA to Servo Connector Adapter Cable for OSD Expander Useful if yo...
  • Plug and Play AV Cables for Fat Shark/Immersion RC
    Plug and Play AV Cables for Fat Shark/Immersion RC
    Wiring your Vector is now even simpler if you use the popular Fatshark/IRC style video transmitters, and either a Fatshark style camera or GoPro Hero 3/4 camera!   Just plug the cable in to your... Wiring your Vector is now even simpler if you use the popular Fatshark/IRC styl...
  • RPM or Temperature Extension Cable (CAB-RPM-EXT)
    RPM or Temperature Extension Cable (CAB-RPM-EXT)
    RPM or Temperature Extension Cable (CAB-RPM-EXT) 12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors. – If you need more information, use these Eagle Tree Systems... RPM or Temperature Extension Cable (CAB-RPM-EXT) 12” (30 cm) 3 pin exten...
  • T-Fitting (PITOT-T-FITTING)
    T-Fitting (PITOT-T-FITTING)
      T-Fitting (PITOT-T-FITTING) Small plastic Tee fitting for sharing the static source of the pitot tube with both altimeter and airspeed static inputs.   – If you need more...   T-Fitting (PITOT-T-FITTING) Small plastic Tee fitting for sharing the st...
     $1.50$1.59 -6%

  • USB Cable Mini-B
    USB Cable Mini-B
            This is a standard USB "Mini-B" for Eagle Tree equipment, i.e. EagleEye FPV Station.           This is a standard USB "Mini-B" for Eagle...
  • USB Micro Cable for Guardian 2D/3D Stabilizer
    USB Micro Cable for Guardian 2D/3D Stabilizer
           Standard "Micro" USB Cable                Standard "Micro" USB Cable   &...
  • Vector Cable Set
    Vector Cable Set
    Set of all four Vector cables: - Audio - Video - GPS harness - Four Inch Receiver harness Set of all four Vector cables: - Audio - Video - GPS harness - Four Inch R...
  • Clip-on Ferrite Choke (CHOKE-FERRITE)
    Clip-on Ferrite Choke (CHOKE-FERRITE)
    Snap-on Ferrite Choke (CHOKE-FERRITE) Useful for suppressing RF from noisy video camera or other leads. Weight 0.4 oz, (7 grams). One will snap around several adjacent cables. – If you need... Snap-on Ferrite Choke (CHOKE-FERRITE) Useful for suppressing RF from noisy vide...
  • Dual Channel A/D Input Board (DUAL-AD)
    Dual Channel A/D Input Board (DUAL-AD)
    Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander adds two channels of high resolution Analog to Digital to the System, with up to 15 bit resolution.   Click here to... Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander ad...
     $79.99$69.99 --14%

  • Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG)
    Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG)
    Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG) Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor. – If you need more information,... Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG) Measures RPM to 50K+. See...
     $6.99$6.99 -0%

  • Pitot Tube Kit V3 - Brass Tube and Clear Silicone Hose
    Pitot Tube Kit V3 - Brass Tube and Clear Silicone Hose
    This is the Pitot Static Brass Tube Kit V3. Pitot Tube Kit V3 One 1000mm (39") of Clear Silicone Hose. Use with R/C Data Recorder and Airspeed Expander from Eagle Tree   – If... This is the Pitot Static Brass Tube Kit V3. Pitot Tube Kit V3 One 1000mm (39&qu...
  • Plastic Pitot Tube Kit (PITOT-KIT-STD)
    Plastic Pitot Tube Kit (PITOT-KIT-STD)
      Our original plastic pitot tube with approx 3 feet of medium silicone hose. – If you need more information, use these Eagle Tree Systems resources – E-mail:...   Our original plastic pitot tube with approx 3 feet of medium silicone ho...
  • Vector Airspeed Expander with Pitot
    Vector Airspeed Expander with Pitot
    The Airspeed Expander allows you to measure true airspeed with your Vector, which complements the ground speed reading with your GPS sensor. The Airspeed MicroSensor uses a Prandtl style pitot-static... The Airspeed Expander allows you to measure true airspeed with your Vector, whi...