The new T1013 Eagle long-range transmitter design was tailored for FPV with a handful of improvements, such as a new switching regulator, ceramic high-efficiency low profile heat sinks, high-quality audio channel, runs 50% cooler than its previous model, lower profile, 10 grams lighter and overall better performance.
It's a powerhouse, providing 500/1000 milliwatts of clean RF output. A very popular transmitter for long-range applications. Despite being a powerful transmitter, it only weighs 0.8 oz (25 grams). With high-gain antennas, it will broadcast audio and video miles away.
We highly recommend installing the transmitter in ventilated areas, to allow the air to keep it cool. As with any of our transmitters, the Eagle has a digital Phase-Lock-Loop circuit avoiding frequency drift, providing stable and solid audio and video delivery. You can not go wrong with it.
Quick User Guide
- 500/1000mW RF output power
- (8) User-selectable channels
- 1.3 GHz frequency band
- Works with any camera PAL or NTSC
- Digital Phase-Lock-Loop circuit no drifting problem
- Works with any of our receivers
- Audio and Video cable with RCA adapter
- Highly integrated circuit
- High reliability/linearity/AIGaAs/GaAs FET amplifier module
- Uses digital phase-lock-loop circuit without temperature drifting problem
- Weight: 30g (transmitter only)
- Metal Case made of Copper-Nickel-Zinc Alloy
Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
Nominal output impedance: 50 ohms
Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
Video input voltage 75-ohm impedance: 1Vp-p
Audio input voltage 10k ohm impedance: 1Vp-p
Subcarrier frequency: 5.5MHz
Operation temperature: -10 to 40 degrees Celsius
Storage temperature: -40 to 80 degrees Celsius
Operating humidity: 20 to 80%
Storage humidity: 10 to 80%
Dimensions and weight: 50 x 26 x 11mm, 0.93oz (26g) (without antenna)
Transmitter's - Available Frequencies
1200 MHz, 1220 MHz, 1240 MHz, 1258 MHz, 1280 MHz, 1300 MHz, 1320 MH, 1340 MHz .
- 1x Eagle 1.3 GHz 500/1000mW AV transmitter
- 1x SMA type dipole antenna x 1
Note: Transmitter's RCA adapter is optional and sold separately HERE
This transmitter can get hot after a long period of use around 140° F (60° C).
We do not recommend using it in confined cases containers without airflow or in cases without heat dissipation.
It's absolutely illegal to ship the Non-US version of this transmitter to any of US address, please do not insist. Retailers and recipients are subjected to a hefty fine.
To operate/use in other countries other than the US please check the local rules before using it, some countries may forbid its use entirely.
By purchasing this equipment, you agree that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit http://www.arrl.org/getting-licensed.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Hobby Wireless is not responsible for any damages, losses, illegal operation, or changes made by the user to the transmitter will be totally the user's responsibility.