Product 3/9

The new T1013 Eagle long range transmitter has been completely redesigned and tailored for FPV with a handful of improvements, such as: new switching regulator, ceramic high efficiency low profile heat sinks, high quality audio channel, runs 50% cooler than its previous model, lower profile, 10 grams lighter and overall better performance.

It's a power house, providing a 500/1000 milliwatts of clean RF output. A very popular transmitter for long range applications. Despite being a powerful transmitter, it only weight 0.8 oz (25 grams). With high gain antennas it will broadcast audio and video miles away. 
It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, the Eagle has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it.    


  • 500/1000mW RF output power
  • (8) User-selectable channels 
  • 1.3 GHz frequency band
  • Works with any camera PAL or NTSC 
  • Digital Phase-Lock-Loop circuit no drifting problem 
  • Works with any of our receivers 
  • Audio and Video cable with RCA adapter 
  • Highly integrated circuit 
  • High reliability/linearity/AIGaAs/GaAs FET amplifier module 
  • Uses digital phase-lock-loop circuit without temperature drifting problem 
  • Weight: 30g (transmitter only)
  • Metal Case made of Copper?Nickel?Zinc Alloy

Output power 50-ohm load CH1 Vcc = 12V: 30dBm (1000mW)
Nominal output impedance: 50 ohms
Operating voltage: Vcc, 10.5V (minimum), 12V (typical), 13V (maximum)
Supply current Vcc = 12V: 350mA (typical), 400mA (maximum)
Video input voltage 75-ohm impedance: 1Vp-p
Audio input voltage 10k ohm impedance: 1Vp-p
Sub carrier frequency: 5.5MHz
Operation temperature: -10 to 40 degrees Celsius
Storage temperature: -40 to 80 degrees Celsius
Operating humidity: 20 to 80%
Storage humidity: 10 to 80%
Dimensions and weight: 50 x 26 x 11mm, 0.93oz (26g) (without antenna)
Standard shipping package:
1.3 GHz 500/1000mW AV transmitter (Lawmate's replacement)
SMA type dipole antenna x 1
Jack connector to RCA AV input and power input cable x 1

Transmitter's Channels/Frequencies

  • Channel 1: 1200 MHz
  • Channel 2: 1220 MHz  
  • Channel 3: 1240 MHz  
  • Channel 4: 1258 MHz  
  • Channel 5: 1280 MHz   
  • Channel 6: 1300 MHz  
  • Channel 7: 1320 MHz   
  • Channel 8: 1340 MHz   

Package Includes:

  • 1x Eagle 1.3 GHz 500/1000mW AV transmitter
  • ?1x SMA type dipole antenna x 1

Transmitter's Jack connector to RCA AV input and power input cable x 1 (optional and sold separately HERE)

Legal notice: 
It's absolutely illegal to ship the Non-US version of this transmitter to any US address, please do not insist. Retailer and recipient are subjected to hefty fine.
To operate/use in other countries other than US please check the local rules before using it, some countries may forbid its use entirely.

By purchasing this equipment, you are agreeing that you understand the rules and assume total responsibility to legally operate the equipment. For information on how to obtain an amateur radio license, visit
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. 
Hobby Wireless is not responsible any damages, losses, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.


Product SKU: 4548-136

  • Brand: ElectrifyRC
Status : Available in Stock

Current Reviews: 0

Qty Discounts New Price